Showing posts with label GRM. Show all posts
Showing posts with label GRM. Show all posts

Thursday, November 8, 2012

Suzuki Swift GTi: Burning the Four-Wheeled Suzuki Torch



Suzuki’s North American operations just rang their death knell. The maker of many a widow-making sportbike never could quite get its four-wheeled vehicles to gain as much recognition in the broader American market. Its last significant effort was the stylish, mid-size Kizashi sedan. There hasn’t been much in the brand for enthusiasts to latch onto.

We’d say it’s not for lack of trying, but really, it is. While the Samurai has its own cult following in the off-road community, Suzuki only brought one pavement performer to the U.S. in recent memory—something small enough that maybe it didn’t seem too foreign to its sportbike people. It was the Suzuki Swift GTi, sold from 1989 to 1994.

You’ve seen its sibling around, usually in the hands of a hypermiler or merely being neglected. The Swift GT—known as the GTi for only the first year, thanks to VW’s trademark lawyers—is the Geo Metro’s faster brother. That’s a low bar to leap, but that doesn’t make the GTi a poor performer.

The Swift is swift because it’s light. A cool hundred horsepower come out of its high-revving 1.3 liter engine, and has just under 1800 lbs. to move around. Unassisted steering means more power to the ground.

It’s one of the champions of the drive-a-slow-car-fast ethos (but it can make tons of power—see the tips on the next page). It’s tiny. It’ll squeeze anywhere in traffic, revs to the skies and is a hoot to wail on, even if all that wailing means you’re still side-by-side with that minivan you just drag-raced from the stoplight. Keep the revs up; this engine has a sportbike’s spirit and a 7500 rpm rev limit. Stiffer springs and four-wheel disc brakes round out the chassis package.

It’s unique from the Metro in cosmetic ways, too: flush aero headlights and different bumpers gives it a sporty look. Suzuki tried to make this a significantly nicer car than the Metro, so it has better—and heavier—interior materials, and racier bucket seats.

If you’re looking for the nicest one in the States, $5000 is about the top of the market. Decent runners can go for $1000 or less, but the sweet spot appears to be about $2000-$3000.

Buy the nicest one you care to afford, and put a little effort into keeping it looking good. The community will thank you for not letting another one of these little toys descend into disrepair, and maybe you’ll earn a little good karma for keeping the four-wheeled Suzuki torch burning after the brand departs our shores.



 Shopping and Ownership
Mike Cove is a long-time Swift enthusiast and the owner of 3Tech, a company that specializes in the Swift and its rev-happy engine. Jen Imai won first place in the Performance Stock class in the 2011 California Rally Series with a Suzuki Swift GT. We mined their minds for these tips. 

The Swift community is small, but active and resourceful. Look to the TeamSwift message board to answer your questions and help you find high-performance parts. Group-buys come around regularly for custom-made bits.

The engine is remarkably robust, and can make a lot of power on stock internals; It has a forged, nitrided crank, flat-top pistons, robust connecting rods and great head flow. A set of camshafts—available through 3Tech—will let it rev to 9000 rpm without problems. The intake manifold, header and pistons from the overseas Suzuki Cultus GTi are the hot commodities for naturally-aspirated horsepower, but the easy upgrades are a larger throttle body and a cone air filter.

Ready to blow your mind? Add a turbo. These little 1.3-liters can handle lots of boost, and can push 200 to 250 horsepower. Using pistons from the ’98-2001 Swift/Metro 1.3-liter drops compression to a boost-friendly 8.5:1.

Expect to break transmissions with high power or off-road abuse. Third gear is weak, and the second-gear synchro tends to wear out. Don’t be surprised with a 1-2 crunch on a high-mileage car. Rally racing will tend to bust the differential’s spider gears, but a robust limited-slip is available from Gripper. If you’re adding a turbo, the whole box has to go (though as of this writing, a group-buy on straight-cut gears is available on TeamSwift). A stronger transmission from a 1.6-liter Suzuki Esteem can be adapted.

Most chassis components and body panels will interchange with the Geo Metro. The GT’s unique bumpers—which changed for 1992, too, along with the interior fabric—can be hard to find in some areas, but Metro parts are plentiful in every junkyard.

For a great street suspension upgrade, pair the KYB GR2 shocks with H&R Springs. The cost is low, and it works very well. If you want to go racing with a hardcore setup, Hot Bits sells a full coil-over setup. Rear pillow-ball suspension mounts from an Eagle Talon can be adapted to the rear shocks.

The four-wheel disc brakes are capable enough, but good brake pads can be hard to find. Lucky that Honda CRX front brake calipers are a direct replacement for the Swift’s. Upgrade to the CRX calipers—they fit with the stock Swift rotors—and a world of pad options open up.

Look for rust on the rocker panels, and on the front frame horns near where the lower control arms attach. It can be hard to spot. The chassis is rather flexible, too, and cars with weak frames can exhibit cracked windshields. Look carefully.

The driving experience is very sensitive to weight; what’s great fun alone becomes a chore with a passenger. Likewise, weight reduction is the easiest way gain noticeable performance. The spare tire, jack, and back seat weigh a combined 100 lbs.

Avoid fitting heavy wheels. The stock alloys are a mere 9 pounds. Getting heavy rolling stock only adds rotating mass, which will make the car feel sluggish. Still feeling sad off the line? Consider using a 4.39:1 final drive from a ’95-up Metro. It’ll feel a bit better than the Swift’s 4.10:1 gear.


SPECS
1989-94 Suzuki Swift GTi
layout:      front engine, front-wheel drive
engine:     G13B-spec 1.3-liter DOHC four-cylinder, aluminum block and heads
horsepower:        100 @ 6500 rpm
torque:     83 ft.-lbs. @ 5000 rpm
transmission:       five-speed manual
suspension:          strut front and rear
brakes:     four-wheel disc
wheels:     14x5-in. alloy
tires:         175/60R14

PARTS
3tech: valvetrain and engine performance parts, teamswift.net/3tech
Feal Suspension: coil-over suspension (Hot Bits U.S. distributor), fealsuspension.com, (909) 477-3030
Gripper Differentials: limited-slip differentials, gripperdifferentials.com
Hot Bits: coil-over suspension, hotbits.org
John’s Foreign Engines: engine-related parts, g13b.com, (800) 450-3177

COMMUNITY
TeamSwift: enthusiast forum, teamswift.net
Redline GTi: enthusiast forum, redlinegti.com

Sunday, June 5, 2011

I'm gonna be an oracle for a minute here...

This building used to be a lamp store. Yeah, go figure.

...and pretend like I know the future. 

This blog has its place. So does the writing I do for Motorsport Marketing's paper publications. And while I have a staff blog there, it is somewhat more limited in scope and style than The Sentimental Mechanic cares to be at times. 

So! The magazines will get, of course, the stories I'm assigned as well as the longer pieces I come up with and research on their time and dime. The GRM staff blog will get a more distilled, shorter version of what you might normally see here. I'm going to venture a guess that I shouldn't be writing, for example, product reviews on the staff blog without any editorial oversight or input from other people on staff, so things like the forthcoming (strongly negative) speedyracerparts header review will remain here at sentimentalmechanic.com. As will road sightings, longer personal blathering about cars and detailed worklogs, and, of course, off-topic ramblings.

Keep in mind that GRM does not in any way support The Sentimental Mechanic, and the views expressed here do not necessarily relate to anything the GRM staff believes. /obligatoryDisclaimer

My current plan is to post a link here whenever I post something on the staff blog and when one of my pieces gets posted to the website. I may reduce that to periodical aggregates if it gets to be too much -- this isn't a Twitter feed, after all.

As of this writing, I've made two posts on the GRM staff blogs. They are as follows:

You can see a list of all my GRM posts at this permanent link:

Keep watch there for the full up-to-the-minute Sentimental Experience. Otherwise, just stay tuned here and buy a subscription to Grassroots Motorsports to help pad my paycheck.

And I thank you once again, loyal readers, for being loyal, and for reading. I sure as shit couldn't do this if you all were illiterate.*

Keep your wounds greased and your wrenches handy,

Alan
TSM

*and that's one sentence you'll likely never read in a GRM blog.

Friday, April 22, 2011

A brief note about the not-too-distant future.

Dear readers, (All seven of you. Hi Mom!*)

I have a bit of a personal note that may affect the future of this blog. I've been hired to write for Motorsport Marketing, publishers most notably of Grassroots Motorsports and Classic Motorsports magazines. This is a dream job for anyone who has wielded both a wrench and a pen, and I'm very fortunate to get it.

Naturally, this disturbs all my previous plans for the year. My brother-in-law recently sold his Supra, so that's one project down. All my LeMons plans are now up in the air. And a few are getting expedited, such as the Miata engine rebuild, so I can have a reliable car for the trip. I have a number of other things to deal with.

But those changes are all small potatoes compared to what I'm getting. I'm moving to Florida, home of sandy beaches and warm weather. That'll be good for the ol' Brasilian blood. I'll work with a bunch of really cool people who are passionate about what they do, put out a couple kickass magazines, bust my ass and have something to be really proud of.

So, rather than continuing to plug away at boring work inside my beige box, I'm living the dream. I never thought I'd be that guy, but here I am. Well, there I'll be. Soon enough. Whether or not I'll have the time, energy, or content to keep the blog alive is another question entirely. If this sentimental mechanic goes quiet sometime after late May, you can look for my writing in the pages of your preferred Motorsports magazine. You'll be seeing my byline there soon enough.

Keep your wounds greased and your wrenches handy.

Alan
TSM

*My mom doesn't actually read my blog.